The Shimano BR-MT410 disc brake for All Mountain as well as City & Touring use consists of a 2-piston brake caliper and a reach adjustable 2-finger brake lever made of aluminium. The brake lever is mounted to the handlebars with a split clamp, which also allows the combination with a matching I-Spec EV shifter. Funnel bleeding and One-Way Bleeding technology, which prevents air bubbles from remaining in the caliper, make maintenance easier. As a J-Kit this brake is delivered in a way that you can easily mount it, even if internal brake hose routing is possible.
TECHNOLOGY USED
I-Spec EV
I-Spec EV describes a variant of the connection between brake lever and shifter in MTB drivetrains. This type of mounting allows the shifter to be adjusted both horizontally and vertically in relation to the brake lever, and ensures a tidy cockpit by reducing the number of clamps required. Compared to I-Spec and I-Spec II, I-Spec EV offers a much wider adjustment range. 14 mm adjustment range the longitudinal direction and up to 60° rotation allow an optimal ergonomic adjustment to your riding style, your sitting position and your anatomy.

One-Way-Bleeding
One Way Bleeding is a technique used on the brake calliper that makes it easier to bleed the brake. The hose routing has been optimised so that no air bubbles remain in the brake calliper. In combination with the funnel, the brake can be bled cleanly and easily.

J-Kit
J-Kit is a simple hose connection system for hydraulic brakes on internally routed hoses so that you can install your brake quickly and easily. The brake hose does not come connected to the brake to facilitate the routing of the hose in the frame. The brake hose is already filled with oil in the J-Kit and sealed with a thin membrane. There is a small pin in the J-Kit brake lever that pierces this diaphragm during
SPECIFICATION
Application: All Mountain, City & Touring, Cross Country
Type: hydraulic, 2 pistons
Actuation: mineral oil
Hose: SM-BH59-JK-SS
Line Length (Front/Rear): 1000 mm/1700 mm
 
TECHNICAL INFORMATION - CALLIPER
Calliper Mount: post mount
Pistons: 2
Pads: B01S resin
Design: 2-piece
Calliper Material: aluminium
Hose Connection: straight
 
TECHNICAL INFORMATION - LEVER
Lever Length: 2-finger
Adjustment Options: reach adjust (with tools)
Installation: clamp (split), I-Spec EV
Design: right (side-specific), left (side-specific)
Brake Lever Material: aluminium
Brake Lever Housing Material: aluminium
Hose Connection: straight
 
FEATURES
Powerful 2-piston brake caliper
Superior modulation
IS mounting and PM non direct mounting possible with adapter
Resin pistons
Recommended brake rotor: SM-RT30, SM-RT54, SM-RT56
Funnel bleeding
Brake caliper painted, bolt made of steel (5 mm)
 
MANUFACTURER PART NUMBERS
Front: EMT4101JLFPRA100
Rear: EMT4101JRRXRA170
CONTENTS
1 x Shimano BR-MT410 + BL-M4100 disc brake, front or rear
1 x Shimano SM-BH59-JK-SS brake hose, 1000 mm (front) or 1700 mm (rear)
1 pair of Shimano B01S brake pads
1 x inserts
1 x olives
2 x calliper bolts
1 x Snap ring, mount ready, filled, bleeding is recommended